You just got your concrete swimming pool installed out in the backyard. Congratulations! You’re going to have a blast. Now that the cement has been poured and is starting to dry, it’s time you learned how to cure a cement pool. The reason you need to cure your pool is to strengthen the concrete. If it dries up without being cured, the ingredients inside it won’t bond all the way, making for weak points that could crack or even break. The way you’re going to cure you pool is similar to how you would cure a slab of concrete or a sidewalk: give it a light pounding with water. The selection of the swimming classes for adults is not an easy task for the person. Along with the following steps, the classes for swimming should be paid due attention.
Step One:
Make sure the pool’s hydrostatic plugs are installed. This is going to act as a kind of bathtub drain plug. You’re going to actually fill the pool while you’re curing it. Don’t worry, you’re not going to get pieces of concrete floating around in the pool water.
Step Two:
Get your garden hose and attach a sprinkler head to it. What you want to do to cure the concrete is bombard it with water overtime, making sure it doesn’t have time to fully dry out. The best way to go about giving it this barrage of H2O is with a sprinkler.
Step Three:
Make sure your water is not well water! If there is any iron in the water you’re about to cure the cement with, there’s a good chance you’ll end up staining it.
Step Four:
Begin hitting the cement with sprinkler water. Make sure to get every inch of the pool. Any parts to miss are liable to dry out and will be the pool’s weak points. You don’t want any weak points. As you’re going around wetting down the cement, you’ll also be filling the pool. This will let your cement pool cure more thoroughly. You may want to add a second sprinkler as well. This will help you to fill the pool faster, as well as make sure you don’t let any spots dry too quickly.
Step Five:
Once your pool is filled with water, you can let it sit a little while so the concrete can absorb as much of the water as possible. It’s also a good idea at this point to turn on the pool’s pump and filter for about 24 hours or more until the water is clean and no longer murky.
Now you know how to cure your cement pool. Once the job is done, make sure that the chemicals you put in the water (like chlorine) are well mixed so they don’t just sit at the bottom of the pool. If it hasn’t cured hard enough, the resting chemicals will stain.
